Operation Manual

Integration Guide 25
Error Codes
Upon startup, if the reader’s LED2 and Green Spot are blinking alter-
nately, this means the reader has not passed its automatic Selftest and has
entered FRU (Field Replaceable Unit) isolation mode. If the reader is re-
set, the sequence will be repeated. Press and release the trigger to see the
FRU indication code from LED2 flashes.
The following table describes the LED flashes associated with an error
found.
Flash Memory
Update
Occurs while update is in progress Blue LED blinks
a
Except when in sleep mode or when a Good Read LED Duration other than 00 is selected
Number of
LED2 Flashes
Error Corrective Action
1 Configuration
Contact Helpdesk
for assistance
2Interface PCB
6 Digital PCB
11 Imager
Indicator Description LED L2 of J2