Operation Manual

Linking the Reader

Quick Reference Guide 17

Linking to Bluetooth Adapter in HID

1. Install any drivers provided with the Bluetooth adapter.

2. Scan the Link to a PC in HID bar code below to make the

canner visible to the host computer.

3. Use the host computer's Bluetooth manager to "Discover

new devices" and select "Datalogic Scanner." If you

receive an error message, it may be necessary to disable

security on the device.

4. Select "connect" on the PC to link the reader to the PC.

Use a text editor to see incoming data from the reader.

Link to a PC in HID

Use Variable PIN Code

When you hear the beep and see the Green LED blinking indicat-

ing the reader is waiting for an alphanumeric entry, enter the vari-

able PIN Code by scanning the bar code(s) corresponding with

the required PIN Code from

Keypad, starting on page 50.

Some Bluetooth drivers on the Host (such as WIDCOMM and

BlueSoleil 8) require a Variable PIN Code. When attempt-

ing connection in HID Profile, the application presents a

window that includes a PIN Code which is to be input using

the GBT4100. Please read the barcode "Use Variable PIN

Code" and restart the sequence from step 2 above.