Operation Manual

Linking the Reader
16 Gryphon™ I GBT4100
Linking the Reader
Link Datalogic RF Devices to Base
For RF devices, before configuring the interface it is necessary to
link the handheld with the base.
To link the handheld and the base, press the trigger to wake it and
place it on the base. If the reader was previously linked to another
base, you must first scan the Unlink barcode before re-linking to
the new
base.
Link Scanner to Bluetooth Adapter in Server Mode
1. Install any drivers provided with the Bluetooth adapter.
2. Scan the Enable RF Link to Server label below to make the
scanner visible to th
e host computer.
3. Use the host computer’s Bluetooth manager to “Discover
new devices” and select "Datalogic Scanner." If you
receive an error message, it may be necessary to disable
security on the device.
4. Use an RS-232 terminal program to see incoming data
on the port designated by the computer's Bluetooth
manager.
The Gryphon I GBT4100 can be set up to require a PIN code
when connecting. If you want to set up a PIN, or when add-
ing new equipment to a system that uses a custom security
PIN, please see the PRG for information.
Unlink
Enable RF Link to Server