Operation Manual

Gryphon-HC Handheld Products Cleaning Procedure

Applicable to Gryphon I GD4XXX-HC, GM4XXX-HC, 

GBT4XXX-HC Healthcare Models



Corded Models

Exterior surfaces and scan windows exposed to spills, smudges or

debris accumulation require periodic cleaning to ensure best per-

formance during scanning operations.

Use a soft, lint-free cloth or lens tissue to clean the product.

Dampen it with an approved cleaning agent. Gently wipe all sur-

faces.

Use approved cleaning agents only (see Table 1 below).

Item Description Item Description

Sani-Cloth® HB, Sani-Cloth® Plus,

Super SaniCloth®

Quaternary Ammonium Chloride

solution

Virex® 256

n-Alkyl Dimethyl Benzyl



Ammonium Chloride; Didecyl

Dimethyl Ammonium Chloride

Hepacide Quat Il Virucidal disinfectant cleaner 409® Glass and Surface Cleaner

Isopropanol (Isopropyl Alcohol),



2 propanol, dimetil carbinol

Alcohol Wipes 70% Isopropyl Alcohol Windex® Blue Isopropyl Alcohol

CaviWipes™

Isopropanol 10-20%; Ethylene Glycol

Monobutyl Ether 1-5%

Clorox® Bleach

Sodium Hypochlorite;



Sodium Hydroxide

100% Gentle dish soap and water

*When using Ammonia Chloride Solutions be sure

to remove residue from the contacts after cleaning.

Do not use abrasive or aggressive cleansing agents or

abrasive pads to clean scan windows, contacts, or

plastics.

Do not spray or pour liquids directly onto the unit.

Table 1. Tested Cleaning Agents

CAUTION

INSTRUCTIONS

PAGE 1
INSTRUCTIONS Gryphon-HC Handheld Products Cleaning Procedure Applicable to Gryphon I GD4XXX-HC, GM4XXX-HC,  GBT4XXX-HC Healthcare Models   Corded Models Exterior surfaces and scan windows exposed to spills, smudges or debris accumulation require periodic cleaning to ensure best performance during scanning operations. Use a soft, lint-free cloth or lens tissue to clean the product. Dampen it with an approved cleaning agent. Gently wipe all surfaces. Use approved cleaning agents only (see Table 1 below).
PAGE 2
Gryphon-HC Handheld Products Cleaning Procedure Page 2 Cordless Models Exterior surfaces and scan windows exposed to spills, smudges or debris accumulation require periodic cleaning to ensure best performance during scanning operations. Contacts on the scanner and the base should also be cleaned as needed to ensure a good connection. See below for specific information on how to clean the metal contacts. Use a soft, lint-free cloth or lens tissue to clean the product.