Gryphon™ D432/D412Plus Quick Reference Guide
Datalogic Scanning, Inc. 959 Terry Street Eugene, Oregon 97402 Telephone: (541) 683-5700 Fax: (541) 345-7140 An Unpublished Work - All rights reserved. No part of the contents of this documentation or the procedures described therein may be reproduced or transmitted in any form or by any means without prior written permission of Datalogic Scanning, Inc. or its subsidiaries or affiliates ("Datalogic" or “Datalogic Scanning”).
Table of Contents Description ................................................................................................................................................ 3 Using the Gryphon™ D432/D412Plus ............................................................................................. 4 Indicators ................................................................................................................................................... 6 LED Indicators .............................
UPDATES AND LANGUAGE AVAILABILITY UK/US The latest drivers and documentation updates for this product are available on Internet. Log on to: www.scanning.datalogic.com I Su Internet sono disponibili le versioni aggiornate di driver e documentazione di questo prodotto. Collegarsi a: www.scanning.datalogic.com F Les versions mises à jour de drivers et documentation de ce produit sont disponibles sur Internet. Cliquez sur: www.scanning.datalogic.
Gryphon™ D432/D412 Plus Description The Gryphon™ D432/D412Plus reader is an omni-directional barcode scanner having the following characteristics: Plug and Play The Gryphon™ D432/D412Plus is very ergonomic and user-friendly for intuitive operation and is equipped with plug-and-play enhanced Multistandard Architecture. It can be connected to a Host PC through a USB, RS232 or Wedge emulation cable.
Using the Gryphon™ D432/D412Plus Using the Gryphon™ D432/D412Plus Gryphon™ D432/D412Plus normally functions by capturing and decoding codes. The Gryphon™ D432/D412Plus reader uses an intelligent aiming system. By pulling the trigger, the aiming system indicates a field of view, which should be positioned over the code: Aiming System When you pull the trigger a red beam illuminates the code. If the aiming system is centered and the entire symbology is within the aiming system, you will get a good read.
Using the Gryphon™ D432/D412Plus The Gryphon™ D432/D412Plus hand-held reader aiming system is designed for general reading and decoding of 1D and 2D symbols. Some variation in reading distance will occur due to narrow bar width and other factors. When reading codes positioned on reflective surfaces, it may be necessary to tilt the reader with respect to the barcode.
Indicators Indicators LED Indicators The Gryphon™ D432/D412Plus has one green LED indicator signaling the following reader functions: STATUS BEHAVIOR Power ON The LED lights up for 2 seconds to signal the power supply is present. Power ON with USB (without external power supply) The LED blinks until the Host accepts the device. Normal Function The LED lights up after a good decoding and will switch off only at the next trigger press.
Connections Connections RS232 Wedge The Wedge is only for Gryphon D432 + models USB The Gryphon™ D432/D412Plus reader requires the USB interface cable. If required IBM PORT 9B* / IBM PORT 5B* / IBM USB *The IBM PORT 9B and IBM PORT 5B is only for Gryphon D412Plus models.
Disconnecting the Cable Disconnecting the Cable USB Interface Configuration The USB interface is compatible with: Windows 98 (and later) Mac OS 8.0 (and later) IBM POS for Windows 4690 Operating System Start-Up As with all USB devices, on connection the Host performs several checks by communicating with the Gryphon D432/D412Plus. During this phase the green LED on the Gryphon D432/D412Plus blinks and normal operations are suspended.
USB Interface Configuration Now you can read the USB interface configuration code according to your application. Load drivers from the O.S. (if requested). When configuring the USB-COM interface, the relevant files and drivers must be installed from the USB Device Installation software, which can be downloaded from the web site http://www.scanning.datalogic.com. The reader is ready. Figure 1.
Interface Selection Interface Selection RS232 Wedge – IBM AT AMHKHMFOHNGNENEIEPANHOGOCK AGPEPJAMDKEOFMHMLJAKFEHFKK AMGNPJCJGIIJCMCEGJMHNDOLLK AIFBJLBGMHPLNKECPCGMBBIBOK AAPHBAJJDAAGMGKDDAOHBGGLHK AEKFBONJCDDIECLFJIJKMCHLIK DLDDLDLDLLDLLLLDLLDDDLDLLL AMHKHMFOHNGNENEIEPANHOGOCK AGPEPJAMDKEOFMHMLJALFAEHKK AEONPJCJGIIJCMCEHPLLHLPPJK AIFBJLBGMHPLNPDFHGDGFIBDOK AAPHBAJJCGCOPJDIMBCEANODDK AFKFBPPJPJCAALOIKIECIPIKLK DDLDLDLDDLDLLLLDDDDDDLDLDL USB BULK USB KB EMULATION AMHKHMFOHNGNENEIEPANHOGOCK AGPEPJAMDKEOF
Wedge Keyboard Nationality Wedge Keyboard Nationality This parameter default value is restored through the Interface Selection code and not through the Restore Default code. Select one of the following keyboard nationality codes.
USB Keyboard Nationality USB Keyboard Nationality This parameter default value is restored through the Interface Selection code and not through the Restore Default code. Select one of the following keyboard nationality codes.
Reading Parameters Reading Parameters Aiming System Delay Point the reader at the target and pull the trigger to enable the aiming system and the illuminator (red beam) to capture and decode the image. The aiming system will briefly switch off during the acquisition time and if no code is decoded will switch on again before the next acquisition. The illuminator will remain on until the symbol is decoded. As you are reading code symbols, adjust the distance at which you are holding the reader.
Default Configuration Default Configuration RS232 Standard DEFAULT SETTINGS 115200 baud, no parity, 8 data bits, 1 stop bit, no handshake, no protocol, FIFO enabled, intercharacter delay = 0, intercode delay = 0, serial trigger lock disabled, serial trigger lock disable character = NUL, serial trigger lock enable character = NUL, RX Timeout = 10 sec USB COM Emulation DEFAULT SETTINGS no handshake, no protocol, FIFO enabled, intercharacter delay = 0, intercode delay = 0 USB Keyboard Emulation DEFAULT SETT
Default Configuration DATA FORMAT – Concatenation Concatenation disabled, 2 EAN/UPC codes concatenated, Set First Concatenated Code Length 000 = any length, Set Second Concatenated Code Length 000 = any length, Set Third Concatenated Code Length 000 = any length, Set Fourth Concatenated Code Length 000 = any length, Concatenation with Intercode Delay disabled, Concatenation Timeout 10 seconds, Concatenation Failure Transmission = Tx codes causing failure, Transmission after Timeout = No code transmission,
Operating Test Operating Test EAN-13 Code 39 (Standard) 1 234567 000992 Code 128 t e s QR 16 1 7 1 6 2 PDF417 t Data Matrix (Normal) Gryphon™ D432/412Plus
Technical Features Technical Features Gryphon™ D432/D412Plus Common Features Electrical Features Operating Voltage (D432 + ) 4.75 to 5.25 V (D412Plus ) 4.75 to 24V Power Consumption @ 5V (D432 +, Typical) 245 mA @4.75V (D432 +, Peak current) 330 mA @ 5V (D412Plus, Typical) 340 mA @ 4.
Technical Features Wavelength Laser Safety Class Ambient light Optical Features (continued) Focus distance Field of view Horizontal field of view at distance (d) in mm Vertical field of view at distance (d) in mm Max Resolution 650 nm Class 2 - EN 60825-1; Class II CDRH 0 - 100000 lux 110 mm 39°(H)x25°(V) 0.7d + 24 0.46d + 15 Linear codes - mm (mils) 0.10 (4) PDF417 - mm Datamatrix – mm (mils) (mils) 0.10 (4) 0.17 (6.6) Depth of field* 1D (linear): X-dimension mm (mils) Code39 0.
Services and Support Services and Support Datalogic provides several services as well as technical support through its website. Log on to www.scanning.datalogic.com and click on the links indicated for further information including: Products Search through the links to arrive at your product page where you can download specific Manuals and Software & Utilities including: • Datalogic Aladdin™, a multi-platform utility program that allows device configuration using a PC.
Compliance Compliance Aiming System Laser Beam Output Window FCC Compliance Modifications or changes to this equipment without the express written approval of Datalogic could void the authority to use the equipment. This device complies with PART 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference which may cause undesired operation.
Compliance Laser Safety The Gryphon™ D432/D412Plus hand-held reader is a Class 1 LED product regarding its Illuminator and a Class 2 laser product regarding its Aiming System. LED Illuminator The use of an illuminator in the Gryphon™ D432/D412Plus hand-held reader is a Class 1 LED product: ILLUMINATORE LED CLASSE 1 AUSLEUCHTER LED KLASSE 1 ILLUMINATEUR A LED DE CLASSE 1 ILUMINADOR LED DE CLASE 1 Aiming System The Gryphon™ D432/D412Plus aiming system meets the Class 2 requirements for laser safety.
Compliance I LA LUCE LASER È VISIBILE ALL'OCCHIO UMANO E VIENE EMESSA DALLA FINESTRA INDICATA NELLA FIGURA. LUCE LASER NON FISSARE IL FASCIO D F E DIE LASER-STRAHLUNG IST FÜR DAS MENSCHLICHE AUGE SICHTBAR UND WIRD AM STRAHLAUS TRITTSFENSTER AUSGESENDET (SIEHE BILD) LE RAYON LASER EST VISIBLE À L'OEIL NU ET IL EST ÉMIS PAR LA FENÊTRE DÉSIGNÉE SUR L'ILLUSTRATION DANS LA FIGURE A LUZ LÁSER ES VISIBLE AL OJO HUMANO Y ES EMITIDA POR LA VENTANA INDICADA EN LA FIGURA.
Compliance ITALIANO Le seguenti informazioni vengono fornite dietro direttive delle autorità internazionali e si riferiscono all’uso corretto del terminale. NORMATIVE STANDARD PER LA SICUREZZA LASER Questo prodotto risulta conforme alle normative vigenti sulla sicurezza laser alla data di produzione: CDRH 21 CFR 1040 e EN 60825-1. Non si rende mai necessario aprire l’appa-recchio per motivi di installazione, utilizzo o manutenzione.
Compliance Der Produkt benutzt eine Laserdiode. Obwohl zur Zeit keine Augenschäden von kurzen Einstrahlungen bekannt sind, sollten Sie es vermeiden für längere Zeit in den Laserstrahl zu schauen, genauso wenig wie in starke Lichtquellen (z.B. die Sonne). Vermeiden Sie es, den Laserstrahl weder gegen die Augen eines Beobachters, noch gegen reflektierende Oberflächen zu richten.
Compliance No es necesario abrir el aparato para la instalación, la utilización o la manutención. La utilización de procedimientos o regulaciones diferentes de aquellas describidas en la documentación puede causar una exposición peligrosa a la luz láser visible. ATENCIÓN El aparato utiliza un diodo láser a baja potencia. No son notorios daños a los ojos humanos a consecuencia de una exposición de corta duración.
Compliance WEEE Compliance Waste Electrical and Electronic Equipment (WEEE) Statement English For information about the disposal of Waste Electrical and Electronic Equipment (WEEE), please refer to the website at www.scanning.datalogic.com. Italian Per informazioni sullo smaltimento delle apparecchiature elettriche ed elettroniche consultare il sito Web www.scanning.datalogic.com.
Compliance NOTES Quick Reference Guide 27
Compliance NOTES 28 Gryphon™ D432/412Plus
Datalogic Scanning, Inc.
Australia Japan Datalogic Scanning Pty Ltd Telephone: [61] (2) 9870 3200 australia.scanning@datalogic.com Datalogic Scanning KK Telephone: 81 (0)3 3491 6761 japan.scanning@datalogic.com France and Benelux Latin America Datalogic Scanning Sarl Telephone: [33].01.64.86.71.00 france.scanning@datalogic.com Datalogic Scanning, Inc Telephone: (305) 591-3222 latinamerica.scanning@datalogic.com Germany Singapore Datalogic Scanning GmbH Telephone: 49 (0) 61 51/93 58-0 germany.scanning@datalogic.
