User Manual

Product Reference Guide 311
Appendix A
Standard Defaults
The most common configuration settings are listed in the “Default” col-
umn of the table below. Page references are also provided for feature
descriptions and programming bar codes for each parameter. A column
has also been provided for recording of your preferred default settings
for these same configurable features.
Table 1. Standard Defaults
Parameter Default Your Setting
Page
Number
GLOBAL INTERFACE FEATURES
Host Commands — Obey/Ignore
Obey 35
USB Suspend Mode
Disable 35
RS-232 ONLY
Baud Rate
9600 38
Data Bits
8 Data Bits 39
Stop Bits
1 Stop Bit 39
Parity
None 40
Handshaking Control
RTS 41
RS-232/USB-Com
Intercharacter Delay
No Delay 43
Beep On ASCII BEL
Disable 43
Beep On Not on File
Enable 44
ACK NAK Options
Disable 45
ACK Character
‘ACK’ 46
NAK Character
‘NAK’ 46
ACK NAK Timeout Value
200 ms 47
ACK NAK Retry Count
3 Retries 47
ACK NAK Error Handling
Ignore Errors Detected 48