User Manual

Positioning the Base Station
Product Reference Guide 15
Securing the DC Power Cord (Optional)
The DC power cord for the adapter can be secured to the bottom of the base
in order to maximize the mechanical retention of the cable itself. The rout-
ing of the power cord can be changed
to accommodate the base station
positioning: horizontal, stand or wall mounting. The cables can be looped
around to the front of the Base Station, or fed directly out the back of the
Base Station, as shown in Figure 8 on page 15.
Figure 8. Options for routing the DC cord
Please refer to the arrows depicted on the bottom of the base when placing
the cables, detailed in Figure 9.
Figure 9. Arrows showing routing
Host Connection: Verify before connection that the reader’s cable type is com-
patible with your host equipment.
Most connections plug directly into the host device as shown in Figure 10.
Keyboard Wedge interface cables have a ‘Y’ connection where its female end
m
ates with the male end of the cable from the keyboard and the remaining
end at the keyboard port on the terminal/PC.