User Manual

QR Code Enter/Exit Programming Mode
Product Reference Guide 229
QR Code Set Length 1
Specifies one of the bar code lengths for QR Code Length Control. Length 1
is the minimum label length if in Variable Length Mode, or the first fixed
length if in Fixed L
ength Mode. Characters can be set from 0001 to 7,089
characters in increments of 0001 (pad with zeroes).
See page 283 for detailed instructions on setting this feature.
$CQRL1
Select QR Code Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start again
at the beginning.
CANCEL
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at left followed by the digits from the Alphanumeric
characters in
Appendix D, Keypad r epresenting
your desired character(s). End by scanning the
ENTER/EXIT bar code again.
~
DEFAULT
0001 = Length 1 is 1 Character