User Manual

Maxicode Enter/Exit Programming Mode
Product Reference Guide 221
Maxicode Set Length 2
This feature specifies one of the bar code lengths for Maxicode Length Con-
trol. Length 2 is the maximum label length if in Variable Length Mode, or
the second fixed length if in Fixed Length M
ode. Characters can be set from
0001 to 0145 characters in increments of 0001 (pad with zeroes).
See page 283 for detailed instructions on setting this feature.
$CMXL2
Select Maxicode Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start again
at the beginning.
CANCEL
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at left followed by the digits from the Alphanumeric
characters in
Appendix D, Keypad representing
your desired character(s). End by scanning the
ENTER/EXIT bar code again.
~
DEFAULT
Length 2 is 0145 Characters