User Manual

Positioning the Base Station
Product Reference Guide 13
Positioning the Base Station
The base station/charger may be set up in desk application to hold the
reader in three different positions, either a horizontal or standing or vertical
position, in order to provide the most comfortable use depending on the
needs.
Figure 6 - Base Station Positions and related clips to be used
Horizontal Standing Vertical
This is preferred unless a different
specific positioning is required:
*maximum ease of insertion
*minimum effort and at
tention
required to customer when docking
the scanner
This is preferred if the scanner is to
be
used in stand mode and not
needed to be often removed from
the base station.
This is preferred when lack of
room on the desktop recom-
mends scanner to be left vertical
duri
ng recharging.
CAUTION
To ensure best contact and performance, do not interchange the parts
used for different mounting configurations.
Avoid the following errors when mounti
ng the clips as this can prevent
proper engagement of the charging contacts.
Error: clip mounted upside down Error: clip not fully inserted
At the same time verify that the rear clips are
present and properly
inserted. The absence of the rear clip could prevent proper engagement of
the charging contacts when in standing or vertical position.