User Manual

Enter/Exit Programming Mode1D Code Selection

206

Gryphon™ I GD44XX/GBT4400/GM440X

Plessey Set Length 2

This feature specifies one of the bar code lengths for Plessey Length Con-

trol. Length 2 is the maximum label length if in Variable Length Mode, or the

second fixed length if in Fixed Length Mode. Length includes the bar code’s

check, data, and full-ASCII shift characte

rs. The length does not include

start/stop characters.

The length can be set from 1 to 50 characters. A setting of 0 specifies to

ignore this length (only one fixed length).

Table 22 provides examples for setting Length 2. See page 283 for detailed

instructions on setting this feature.

Table 22. Plessey Length 2 Setting Examples

STEP ACTION EXAMPLES

1 Desired Setting

00 (Ignore This

Length)

07 Characters 15 Characters 50 Characters

2 Scan ENTER/EXIT PROGRAMMING MODE

3 Scan SELECT PLESSEY LENGTH 2 SETTING

Scan Two Characters From

Appendix D, Keypad

‘0’ and ‘0’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’

5 Scan ENTER/EXIT PROGRAMMING MODE

$CPLL2

Select Plessey Length 2 Setting

Make a mistake? Scan the CANCEL bar code to abort and

not save the entry string. You can then start again at the

beginning.

CANCEL

DEFAULT

50 = Length 2 is 50 Characters