User Manual

Enter/Exit Programming Mode1D Code Selection

202

Gryphon™ I GD44XX/GBT4400/GM440X

MSI Set Length 2

This feature specifies one of the bar code lengths for MSI Length Con-

trol

. Length 2 is the maximum label length if in Variable Length Mode,

or the second fixed length if in Fixed Length Mode. Length includes

the bar code’s check, data, and full-ASCII shift characters. The

length does not include start/stop characters.

The length can be set from 1 to 50 characters. A setting of 0 spec-

ifies to ignore this length (only one fixed length).

Table 20 provides examples for setting Length 2. See page 283 for detailed

instructions on setting this feature.

Table 20. MSI Length 2 Setting Examples

STEP ACTION EXAMPLES

1 Desired Setting

00 (Ignore This

Length)

07 Characters 15 Characters 50 Characters

2 Scan ENTER/EXIT PROGRAMMING MODE

3 Scan SELECT MSI LENGTH 2 SETTING

Scan Two Characters From

Appendix D, Keypad

‘0’ and ‘0’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’

5 Scan ENTER/EXIT PROGRAMMING MODE

$CMSL2

Select MSI Length 2 Setting

Make a mistake? Scan the CANCEL bar code to abort and

not save the entry string. You can then start again at the

beginning.

CANCEL

DEFAULT

50 = Length 2 is 50 Characters