User Manual

Enter/Exit Programming Mode1D Code Selection

196

Gryphon™ I GD44XX/GBT4400/GM440X

Code 93 Set Length 1

Specifies one of the bar code lengths for Code 93 Length Control. Length 1

is the minimum label length if in Variable Length Mode, or the first fixed

length if in Fixed Length Mode. Length includes the bar code’s data charac-

ters only. The length can be set from 01 to 50 characters.

Table 17 provides some examples for setting Length 1. See page 283 for

detailed instructions on setting this feature.

Table 17. Code 93 Length 1 Setting Examples

STEP ACTION EXAMPLES

1 Desired Setting

01 Characters 07 Characters 15 Characters 50 Characters

2 Scan ENTER/EXIT PROGRAMMING MODE

3 Scan SELECT CODE 93 LENGTH 1 SETTING

Scan Two Characters From

Appendix D, Keypad

‘0’ and ‘1’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’

5 Scan ENTER/EXIT PROGRAMMING MODE

Select Code 93 Set Length 1 Setting

Make a mistake? Scan the CANCEL bar code to abort and

not save the entry string. You can then start again at the

beginning.

CANCEL

$CC9L1

DEFAULT

01 = Length 1 is 1 Character