User Manual

1D Code Selection Enter/Exit Programming Mode

Product Reference Guide

167

Standard 2 of 5 Set Length 2

This feature specifies one of the bar code lengths for Standard 2 of 5 Length

Control. Length 2 is the maximum label length if in Variable Length Mode,

or the second fixed length if in Fixed Length Mode. Length includes the bar

code’s check and da

ta characters.

The length can be set from 1 to 50 char

acters. A setting of 0 specifies to

ignore this length (only one fixed length).

Table 8 provides examples for setting Length 2. See page 283 for detailed

instructions on setting this feature.

Table 8. Standard 2 of 5 Length 2 Setting Examples

STEP ACTION EXAMPLES

Desired Setting (pad with

leading zeroes)

00 (Ignore This

Length)

07 Characters 15 Characters 50 Characters

2 Scan ENTER/EXIT PROGRAMMING MODE

3 Scan SELECT STANDARD 2 OF 5 LENGTH 2 SETTING

Scan Two Characters From

Appendix D, Keypad

‘0’ and ‘0’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’

5 Scan ENTER/EXIT PROGRAMMING MODE

$CS2L2

Select Standard 2 of 5 Length 2 Setting

Make a mistake? Scan the CANCEL bar code to abort

and not save the entry string. You can then start again

at the beginning.

CANCEL

DEFAULT

50 = Length 2 is 50 Characters