Operation Manual

Reading Parameters

Gryphon™ I GFS4400

Multiple Labels Ordering by Code Symbology

This feature allows you to specify the order multiple labels are transmitted by symbology type,

when Multiple Labels per Frame is enabled. See page 274 in “References” for detailed

information on setting this feature.

$CSNMS

Select Symbologies for Multiple Labels Ordering

To configure this feature, scan the ENTER/EXIT PROGRAM-

MING MODE bar code above, then the bar code at left fol-

lowed by the digits From the alphanumeric characters In

Appendix d,

keypad representing your desired Charac-

ter(s). End by scanning the enter/exit bar code again.

Make a mistake? Scan the CANCEL bar code to

abort and

not save the entry string. You can then start again at the

beginning.

CANCEL

DEFAULT

000000000000 = Random order

Multiple Labels Ordering by Code Length

Specifies the transmission ordering by code length, when Multiple Labels per Frame is enabled.

DEFAULT

$CSNMT00(CR)

Multiple Labels Ordering = Disable

$CSNMT01(CR)

Transmit Increasing Length Order

$CSNMT02(CR)

Transmit Decreasing Length Order