Operation Manual

Enter/Exit Programming Mode Reading Parameters

Gryphon™ I GFS4400

Mobile Phone Mode

This mode is useful for scanning bar codes displayed on a mobile phone. Other options for this

feature can be configured using the Datalogic Aladdin application.

$CSNPE00(CR)

Mobile Phone Mode = Disable

$CSNPE01(CR)

Mobile Phone Mode = Enable

DEFAULT

Mobile Bias

This variable mode alters scan module operation, optimizing barcode scanning for reading from

mobile device displays rather than standard labels. The range for this setting is from 0 to 255.

DEFAULT

$CSILF00\r

No Mobile Bias

$CSILF

Set Mobile Bias

To configure, scan the ENTER/EXIT PROGRAMMING MODE

bar code above, then the bar code at left followed by the

digits from the Alphanumeric characters in Appendix E,

Keypad representing your desired character(s). End by

scanning the ENTER/EXIT bar code.

Make a mistake? Scan the CANCEL bar code to

abort and

not save the entry string. You can then start again at the

beginning.

CANCEL