Operation Manual

Data Format

Gryphon™ I GFS4400

Label ID

A Label ID is a customizable code of up to three ASCII characters (convert to Hex using the

ASCII Chart on the inside back cover of this manual), used to identify a bar code symbology

type. It can be appended previous to or following the transmitted bar code data depending upon

how this option is enabled. This feature provides options for configuring custom Label IDs or

individually per symbology (see "Individually Set Label ID" on page 57). If you wish to

program the reader to always include an industry standard label identifier for ALL symbology

types, se

e the previous feature "Global AIM ID" on page 53.

See Label ID, starting on page 259 of “References” for more information on setting this feature.

Label ID: Pre-Loaded Sets

The reader supports two pre-loaded sets of Label IDs. See Label ID: Pre-loaded Sets, starting on

page 259 for details on the USA set and EU set.

CAUTION

DEFAULT

$P,AE,P\r

Label ID Pre-loaded Set = USA Set

$P,Ae,P\r

Label ID Pre-loaded Set = EU Set

When changing from one Label ID set to another, all other reader configuration

settings, including the host interface type, will be erased and set to the stan-

dard factory defaults. Any custom configuration or custom defaults will be lost.

Unlike some programming features and options, th

is feature requires that you

scan only one programming bar code label. DO NOT scan an ENTER/EXIT bar

code prior to scanning the bar codes below.