Operation Manual

Product Reference Guide 291
Appendix C
Standard Defaults
The most common configuration settings are listed in the “Default” column of the table below.
Page references are also provided for featur
e descriptions and programming bar codes for each
parameter. A column has also been provided for recording of your preferred
default settings for
these same configurable features.
Table 42. Standard Defaults
Parameter Default Your Setting
Page
Number
GLOBAL INTERFACE FEATURES
Host Commands — Obey/Ignore
Obey 23
RS-232 ONLY
Baud Rate
9600 26
Data Bits
8 Data Bits 27
Stop Bits
1 Stop Bit 27
Parity
None 28
Handshaking Control
RTS 29
RS-232/USB-Com
Intercharacter Delay
No Delay 31
Beep On ASCII BEL
Disable 31
Beep On Not on File
Enable 32
ACK NAK Options
Disable 32
ACK Character
‘ACK’ 33
NAK Character
‘NAK’ 33
ACK NAK Timeout Value
200 ms 34
ACK NAK Retry Count
3 Retries 34
ACK NAK Error Handling
Ignore Errors Detected 35
Indicate Transmission Failure
Enable 35
Disable Character
‘D’ 36