Operation Manual

READING PARAMETERS
Description Parameter Value
Double Read Timeout
20 to 2,550 milliseconds (2.55 seconds) in 10m
s
increments
SNDR f
Illumination Mode Disabled SPIL 00
Triggered 01
Enabled 02
Operating Modes On Line SNRM 00
Serial On Line 01
Automatic 02
Automatic (Object Sense) 03
Phase Off Event Trigger Stop SPTO 00
Timeout 01
Trigger Stop-Timeout 02
Timeout (Scan Active Time) 1 to 255 seconds in 1 second intervals. SNET h
Serial Start Any string of characters (max 20) between 00-FE STON i
Serial Stop Any string of characters (max 20) between 00-FE STOF i
Label Programming Mode Disabled FAPM 00
Enabled 01
Software Configuration Strings
224 Gryphon™ I GFS4400
f = Hex value from 02 to FF representing the minimum time between same labels
h = Hex value from 02 to FF representin
g the decimal number (x20 ms)
i = Hex value from 00 to FE representing the ASCII ch
aracter