Operation Manual

RS-232/USB-COM PARAMETERS
Description Parameter Value
Intercharacter Delay No delay or from 10 to 990 ms R2IC a
Disable Character
Host command character which dis-
ables the reader
R2DC b
Enable Character
Host command character which
enab
les the reader
R2EC b
ACK/NAK Options Disable R2AE 00
Enable for label transmission 01
Enable for host command acknowl-
edge
02
Enable for label transmission and
host command acknowledge
03
ACK Character Selects character to be used as ACK R2AC c
NAK Character Selects character to be used as NAK R2NA c
ACK/NAK Timeout Value No timeout or from 200 to 15000 ms R2AT d
ACK/NAK Retry Count From 0 to unlimited retries R2AR e
ACK/NAK Error Handling Ignore errors detected R2EH 00
Process errors as valid ACK character 01
Process errors as valid NAK character 02
Beep On ASCII BEL Disable R2BB 00
Enable 01
Beep On Not-On-File Disable BPNF 00
Enable 01
Indicate Transmission
Failure
Disable
R2TF 00
Enable 01
Software Configuration Strings
222 Gryphon™ I GFS4400
a = Hex value from 00 to 63 representing the decimal number (00 = no delay; all others x10 ms)
b = Hex value from 00 to FE representing the ASCII character
c = Hex value from
00 to FF repr
esenting the ASCII character
d =Hex value from 00 to 4B re
presenting the decimal number (00 = timeout disabled; all others
x200 ms)
e = Hex value from 00 to FF repr
esenting the number of retries (00 = no retries; 01-FE = 1-254
retries; FF = unlimited retries)