Operation Manual

Setup Custom Configuration Settings
18 Gryphon™ I GFS4400
Custom Configuration Settings
Configure Interface Settings
If your installation requires you to select options to customize your reader, turn to the
appropriate section for your interface type in
"Configuration Using Bar Codes" starting on page 21 .
•
"RS-232 Only Interface" on page 25
• "RS-232/USB-Com Interfaces" on page 30
• "USB Keyboard Settings" on page 37
Global Interface Features
See " Global Interface Features" on page 23 for settings configurable by all interface types.
Configuring Other Features
If your installation requires different programming than the standard factory default settings,
the following sections of this manual allow configuration of non-interface-specific settings you
might require:
Reading Parameters : Reading Parameters include programming for scanning, beeper and LED
indicators and other universal settings.
Symbologies : Includes options concerning the bar code label types (symbologies). These settings
allow you to enable/disable symbologies, set label lengths, require check digit, etc.
Software Version Transmission
The software version of the device can be transmitted over the interface by scanning the
following label.
Transmit Software Version
RevA