Operation Manual

Enter/Exit Programming Mode 2D Symbologies
192 Gryphon™ I GFS4400
China Sensible Code Set Length 1
Specifies one of the bar code lengths for China Sensible Code Length Control. Length 1 is the
minimum label length if in Variable Length
Mode, or the first fixed length if in Fixed Length
Mode. Characters can be set from 0001 to 7,827 characters in increments of 0001 (pad with
zeroes).
See page 255 for detailed instructions on setting this feature.
$CCSL1
Select China Sensible Code Length 1 Setting
To configure this feature, s
c
an
the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at
left followed by the digits from the Alphanumeric
characters in
Appendix E, Keypad representing your
desired character(s). End by scanning the ENTER/EXIT
bar co
de again.
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT
0001 = Length 1 is 1 Character