Operation Manual

2D Symbologies Enter/Exit Programming Mode
Product Reference Guide 187
2D Structured Append
Enables/disables ability of reader to append multiple 2D Codes labels in a structured format.
The structured append property is globally applied to the following symbologies, if these are
enabled:
• Data Matrix •Aztec
•QR Code • PDF 417
DEFAULT
$CDESA00(CR)
Structured Append = Disable
$CDESA01(CR)
Structured Append = Enable
2D Normal/Inverse Symbol Control
Specifies the options available for decoding normal/negative printed 2D symbols. This
configuration item applies globally to all the 2D symbologies that support that feature
according to Standard AIM Specification: Data Matrix, QR, MicroQR, Aztec and Chinese
Sensible Code.
To set decoding of mirrored images, see "Mirror Reading Mode" on page 89. To decode al
l
symbologies, including linear symbologies, refer to "D
ecode Negative Image" on page 90
DEFAULT
$CIPNR00(CR)
Normal/Inverse Symbol Control = Normal
$CIPNR01(CR)
Normal/Inverse Symbol Control = Inverse
$CIPNR02(CR)
Normal/Inverse Symbol Control =
Both Normal and Inverse
.