User Manual

Datalogic 2 of 5 ENTER/EXIT PROGRAMMING MODE

194

Gryphon™ I GD4100/GM4100/GBT4100/L GD4300

Datalogic 2 of 5 Set Length 1

This feature specifies one of the barcode lengths for Datalogic 2 of 5 Length Control. Length 1 is

the minimum label length if in Variable Length Mode, or the first fixed length if in Fixed Length

Mode. The length includes the barcode’s check and data characters. The length can be set from

2 to 50 characters in increments of two.

Table 14 provides some examples for setting Length 1. See page 302 for detailed instructions on

setting this feature.

Table 14. Datalogic 2 of 5 Length 1 Setting Examples

STEP ACTION EXAMPLES

1 Desired Setting

2 Characters 6 Characters 14 Characters 50 Characters

Pad with leading zeroes to

yield two digits

02 06 14 50

3 Scan ENTER/EXIT PROGRAMMING MODE

4 Scan SELECT Datalogic 2 of 5 LENGTH 1 SETTING

Scan Two Characters From

Appendix D, Keypad

‘0’ and ‘2’ ‘0’ and ‘6’ ‘1’ and ‘4’ ‘5’ AND ‘0’

6 Scan ENTER/EXIT PROGRAMMING MODE

Select Datalogic 2 of 5 Length 1 Setting

Make a mistake? Scan the CANCEL barcode to abort and not

save the entry string. You can then start again at the begin-

ning.

CANCEL

DEFAULT

06 = Length 1 is 6 Characters