User Manual

Interleaved 2 of 5 (I 2 of 5) ENTER/EXIT PROGRAMMING MODE

174

Gryphon™ I GD4100/GM4100/GBT4100/L GD4300

I 2 of 5 Set Length 1

This feature specifies one of the barcode lengths for I 2 of 5 Length Control. Length 1 is the

minimum label length if in Variable Length Mode, or the first fixed length if in Fixed Length

Mode. The length includes the barcode’s check and data characters. The length can be set from

2 to 50 characters in increments of two.

Table 8 provides some examples for setting Length 1. See page 302 for detailed instructions on

setting this feature.

Table 8. I 2 of 5 Length 1 Setting Examples

STEP ACTION EXAMPLES

1 Desired Setting

2 Characters 6 Characters 14 Characters 50 Characters

Pad with leading zeroes to

yield two digits

02 06 14 50

3 Scan ENTER/EXIT PROGRAMMING MODE

4 Scan SELECT I 2 of 5 LENGTH 1 SETTING

Scan Two Characters From

Appendix D, Keypad

‘0’ and ‘2’ ‘0’ and ‘6’ ‘1’ and ‘4’ ‘5’ AND ‘0’

6 Scan ENTER/EXIT PROGRAMMING MODE

Select I 2 of 5 Length 1 Setting

Make a mistake? Scan the CANCEL barcode to abort and not

save the entry string. You can then start again at the begin-

ning.

CANCEL

DEFAULT

06 = Length 1 is 6 Characters