Manualshelf

User Manual

ManualsBrandsDatalogic ManualsBarcode ScannersBarcode Scanner 1D Linear Code 0 ... 1 m
101102103104105106107108109110
LED and Beeper Indicators ENTER/EXIT PROGRAMMING MODE
100
Gryphon™ I GD4100/GM4100/GBT4100/L GD4300
Good Read LED Duration
This feature specifies the amount of time that the Good Read LED remains on following a good
read. The good read LED on time can be set within a range of 10 milliseconds to 2,550
milliseconds (0.001 to 2.55 seconds) in 100ms increments.
See page 313 in “References” for detailed instructions and examples for setting this feature.
Select Good Read LED Duration Setting
Make a mistake? Scan the CANCEL barcode to abort and not
save the entry string. You can then start again at the begin-
ning.
CANCEL
DEFAULT
003 = Good Read LED stays on for 300 ms
Indicators are dimmed during sleep.