User manual

Enter Configuration Exit and Save Configuration
Ì$+;Î
WEDGE
Ì$
-
?Î
KEYBOARD SETTING
A EYBOARD SETTING
T be used with terminals or PCs with various k types and nationalities
through a simple keyboard setting procedure.
T of computer or termin t be selected before g the keyboard setting
command.
K setting consists of com ating to the reader how d data corresponding to
th ard used in the applicat keys must be set in a specific order.
Press and release a key to set it.
S aracters may require more than one key pressed simultaneously during normal use
(r the manual of your PC or terminal for keyboard use). The exact sequence must be
in to the reader in this cas ng and releasing the di eys.
Example:
LPHANUMERIC K
he reader can eyboard
he type al mus activatin
eyboard munic to sen
e keybo ion. The
ome ch
efer to
dicated e pressi fferent k
If as to press the "Shift" and "4" keys simultaneously on the keyboard to transmit the
character "$" to the video, to set the "$", press and release "Shift" then press and release "4".
Each pressed and released key enerate an acoustic signal on the reader, otherwise
repress the key. Never press more than one key at the same t to
the normal use of your keyboard.
P ackspace" to correct a key entry. In this case the reader emits 2 beeps.
N APS LOCK" and "NUM LOCK" must be off before starting the keyboard setting
procedure. "SHIFT" must be repressed for each character and cannot be substituted by
"CAPS LOCK".
setting the alphanumeric keyboard
B0TÎ
ys shown in the following table according to their numerical order.
aracters relative to the various national symbologies. In this case:
• The first 4 characters (Shift, A
ke not u
rs
included in the barcode set used.
r keyboard.
The reader signals the end of the procedure with 2 beeps indicating the keys have been
registered.
one h
must g
ime, even if this corresponds
ress "B wrong
ote: "C
ÌF
Read the code above.
Press the ke

Some ASCII characters may be missing as this depends on the type of keyboard: these are
generally particular ch
lt, Ctrl, and Backspace) can only be substituted with
sed, or substituted with each other.
can be substituted with other single symbols (e.g. "SPACE") even if not
ys
• characte
• characters can be substituted with others corresponding to you
51