User manual

GRYPHON™ BT CORDLESS READING SYSTEMS

WEDGE

USA keyboard, caps lock off, caps lock auto-recognition enabled, num lock unchanged, inter-

character and inter-code delays disabled,

DATA FORMAT: code identifier disabled, no field adjustment, code length not transmitted, no

header, terminator = ENTER, character replacement disabled, address stamping = disabled,

address delimiter = disabled

PEN EMULATION

interpret mode, conversion to code 39 disabled, output level normal, idle level normal,

minimum output pulse 600 μs, overflow medium, inter-block delay disabled

DATA FORMAT for BT DEVICE

code identifier disabled, field adjustment disabled, code length tx not transmitted, character

replacement disabled, address stamping = disabled, address delimiter = disabled, no header,

terminator = CR-LF.

POWER SAVE

maximum scan rate

READING PARAMETERS

hardware trigger, trigger active level, no timeout, Flash On = 1 sec, Flash Off = 0.6 sec, one

read per cycle, safety time 0.5 sec, beeper intensity high, tone 2, beeper type monotone,

beeper length short, good read spot duration medium.

DECODING PARAMETERS

ink spread enabled, overflow control enabled, interdigit control enabled, Puzzle Solver™

disabled, decoding safety = one read.