User manual

GRYPHON™ BT CORDLESS READING SYSTEMS
22
4 CONFIGURATION
4.1 CONFIGURATION METHODS
4.1.1 Reading Configuration Barcodes
If you wish to change the default settings, this manual provides complete
configuration of your reader in an easy way.
To configure your reader:
1) Read the Enter Configuration code ONCE, available at the top of each page
of configuration.
2) Modify the desired parameters in one or more sections following the
procedures given for each group. If arguments are required with a command,
you can read additional barcode labels (typically digits) from Appendix C.
3) Read the Exit and Save Configuration code ONCE, available at the top of
each page of configuration.
Reference notes describing the operation of the more complex parameters are given
in chapter 5.
4.1.2 Sending Configuration Strings from Host
An alternative configuration method is provided in Appendix A using the OM-
Gryp
hon™ BT or C-Gryphon connected to the Host via the RS232 interface. Batch
files containing the desired parameter settings can be prepared to configure devices
quickly and easily. This method is particularly useful when many devices need to be
configured with the same settings.