User manual

GRYPHON™ BT CORDLESS READING SYSTEMS

USB START-UP

As with all USB devices, upon connection, the Host performs several checks by

communicating with the OM-Gryphon™ BT. Before the OM-Gryphon™ BT is ready,

the correct USB driver must be loaded

For all systems, the correct USB driver for the default USB-KBD interface is included

in the Host Operating System and will either be loaded automatically or will be

suggested by the O.S. and should therefore be selected from the dialog box (the first

time only).

You can now read codes with the associated Gryphon™ BT reader. At this point you

can read the USB interface configuration code according to your application. Load

drivers from the O.S. (if requested). When configuring the USB-COM interface, the

relevant files and drivers must be installed from the USB Device Installation software

which is available on the CD-ROM and can also be downloaded from the web site:

http://www.scanning.datalogic.com

The OM-Gryphon™ BT is ready.

Connect OM-

Gryphon™ BT to

Host

Select desired USB interface

code (USB-KBD is default)

Read test codes.

OM-Gryphon™ BT is READY

Load drivers

(if requested)

Load drivers

(

if re

uested

)

First Start-Up

Successive start-ups will automatically recognize the previously loaded drivers.