User manual

GRYPHON™ BT CORDLESS READING SYSTEMS
162
8.4 STATUS INDICATORS
The reader has three indicators, LED, Beeper and Good Read Spot. They signal
several operating conditions which are described in the tables below.
H = high tone M = medium tone L = low tone
GRYPHON™ BT READER START-UP
Beeper¹
Meaning
L L L L H Parameters loaded correctly, radio OK
L L L L H L H L Parameters loaded correctly, no answer from radio
H H H H
long tones
Parameter loading error, reading or writing error in the non volatile
memory
H L H L Hardware error in EEPROM
GRYPHON™ BT READER CONFIGURATION
Beeper¹
Meaning
H H H H Correct entry or exit from Configuration mode
L Good read of a command
L L L Command read error
GRYPHON™ BT POWER
Beeper LED Meaning
10 short H 10 short blinks Low Battery
¹ Only the Beeper Intensity command can modify these signals.