User manual

GRYPHON™ BT
158
7 TROUBLESHOOTING
Problem Solution
The beeper and LED signal
radio disconnection from the
remote Bluetooth
®
device.
The distance between the remote device and Gryphon™
BT may be too far or there may be obstacles to radio
transmission between them.
Reconnect.
The requested radio
connection by Gryphon™ BT
Master does not activate.
Reduce the distance between the devices.
Check that Gryphon™ BT is powered (batteries are
charged), that the radio protocol software version is
compatible with Gryphon™ BT, that there is not already
another BT device connected using the same SPP profile.
Insert the remote device address again to Gryphon™ BT.
Check the Gryphon™ BT configuration using the Transmit
configuration command via C-Gryphon cradle.
The remote Bluetooth
®
device
recognizes Gryphon™ BT but
cannot connect to it.
Check that there are no limits set to the connection such
as a password.
Check that the radio protocol software version is
compatible with Gryphon™ BT.
The radio range seems
reduced.
Check that there are no obstacles to radio transmission
between the devices.
A Gryphon™ BT Master fails
to make an automatic
connection.
Double-click the trigger to force an immediate retry of the
radio connection or read the "Request Radio Connection"
code in par. 6.1.
A Gryphon™ BT Master
remains connected to a Slave
device.
Read the "Request Radio Disconnection" code in par. 6.1
or power off the Bluetooth
®
Slave device.
A Gryphon™ BT gun
continuously connects and
disconnects from its OM-
Gryphon™ BT cradle
A second gun has erroneously remained connected to the
cradle. Unbind the second gun using the command in par.
6.1.
The
OM-G
ryphon™ BT has lost the Bind address, for
example after a software upgrade, and therefore refuses
any connection. Repeat the Bind procedure.