User manual

GRYPHON™ BT CORDLESS READING SYSTEMS

152

5.8.3 Auto-Connection (Master only)

Upon power-up, the Gryphon ™ BT reader makes attempts to connect with the

remote Bluethooth

device (Slave). If the connection is not successful, the reader

remains on, but not connected.

In this case reconnection can be requested by double clicking the reader trigger or by

reading the "Request Radio Connection" command in par. 6.1.

5.8.4 Auto-Reconnection (Master only)

If a radio connection is interrupted, the Gryphon ™ BT reader makes attempts to

reconnect with the remote Bluethooth

device (Slave). If the connection is not

successful, the reader remains on, but not connected.

In this case reconnection can be requested by double clicking the reader trigger or by

reading the "Request Radio Connection" command in par. 6.1.

5.9 RADIO PARAMETERS FOR OM-GRYPHON™ BT

CONFIGURATIONS

5.9.1 Batch Mode

Batch mode allows codes to be stored in the gun on a FIFO basis whenever the gun

is out of range. If transmission cannot be successfully completed, then the code is

added to the list. When the gun returns in range, transmission of the codes to the

cradle resumes automatically by successfully reading a new code.