User manual

GRYPHON™ BT CORDLESS READING SYSTEMS
6
2.4 REPLACING GRYPHON™ BT BATTERIES
To change the batteries in your GRYPHON™ BT scanner, proceed as follows:
1. Unscrew the battery cover screw.
2. Open the battery cover.
3. Replace the old battery pack with new one, then screw the battery cover back
into place.
NiMh Batteries
WARNING
Do not incinerate, disassemble, short terminals or expose to
high temperature. Risk of fire, explosion. Use specified
charger only. Risk of explosion if the battery is replaced by an
incorrect type.
Dispose of the batteries as required by the
relevant laws in force.
Battery
cover
Battery
cover screw
+
-