User manual

GRYPHON™ BT POWER
5
The LEDs positioned on the cradle signal the charge status, as described in the
following table:
LED STATUS
Power on /
Data
Yellow On = OM-Gryphon™ is powered.
Charging
Red On = the battery charge is in progress.
Red Blinking = the battery reconditioning is in progress.
Charging
completed
Green On = the battery is completely charged.
Charging +
Charging
completed
Red and Green Blinking together = The reader is not
correctly placed onto the cradle.
Gun Locator/ Battery Reconditioning Button
This button has two different functions.
When the Gryphon™ BT reader is not placed on the OM-Gryphon™ BT cradle
, this
button activates the gun locator function similar to that of a cordless telephone. By
pressing the button the Gryphon™ BT reader will emit an audible tone which allows it to
be located. This function works only when the reader has an active radio connection
and is within the 10 m radio operating range.
When the Gryphon™ BT reader is placed on the OM-Gryphon™ BT cradle, this button
activates the battery reconditioning function which restores the operating autonomy.
that can be lost after many recharging cycles of NiMh batteries. It does this by starting a
deep discharge cycle. The battery is automatically recharged after the discharge cycle
is completed. This process may require several hours.