User Manual

Cleaning Procedure
40 Gryphon™ I GBT4102
Cleaning enclosure and window surfaces
1. Moisten a soft cloth with a recommended cleaning
solution. Be sure to apply the solution to your cloth
first. Wring excessive liquid from the cloth.
2. Use the cloth to wipe down the surface of the unit.
Use cotton swabs, lightly moistened, to reach in
corners and crevices.
3. Minimize the amount of disinfectant applied to the
contacts.
4. Use another clean dry cloth to remove any residue
of the cleaning agent and ensure the unit is dry.
Cleaning electrical contact surfaces
1. Clean the enclosure and window first, as described
above.
2. Use a soft cloth moistened with any isopropyl alco-
hol to clean the surface of the contact. Use care not
to leave any cloth residue.
3. If needed, use a nylon bristled brush to remove
stubborn contamination. Additionally, a clean pen-
cil eraser can be rubbed on the handheld contacts.
4. Finish by wiping with another clean dry cloth to
remove any remaining cleaning agent and ensure
the unit is dry.