User Manual
Table Of Contents
- Gryphon™ I GBT4102
- Table of Contents
- Setting Up the Reader
- Configuring the Base Station
- Connecting the Base Station
- Charging the Batteries
- Linking the Reader
- Selecting the Interface Type
- Programming
- Stand Detection
- Technical Specifications
- LED and Beeper Indications
- Error Codes
- Base Station Indications
- Cleaning Procedure
- Datalogic Limited Factory Warranty
- Support Through the Website
- Ergonomic Recommendations
- Keypad
Cleaning Procedure
Quick Reference Guide 39
Cleaning Procedure
Exterior surfaces and scan windows exposed to spills,
smudges or debris accumulation require periodic cleaning
to ensure best performance during scanning operations.
Contacts on the scanner and base should also be cleaned
as needed to ensure a good connection.
Follow the procedures described in this instruction sheet
to keep your Gryphon device in good operating condition.
Common Cleaning Solutions
The cleaners and disinfectants listed below are recom-
mended for use on Datalogic’s Disinfectant-Ready Enclo-
sures:
CAUTION
Be sure to turn off power and unplug the device
from electrical outlet before cleaning.
Cleaners Disinfectants
Formula 409® Glass and sur-
face cleaner
CaviWipes™
Isopropyl alcohol Clorox® bleach
Dish soap and water Hepacide Quat® II
Windex® Original (Blue) Sani-Cloth®
Virex® II 256
Disinfectants may be harsh on metal con-
tacts. They are recommended for use only on
enclosures.
CAUTION
DO NOT spray or pour cleaner directly onto the
unit.
DO NOT use solutions in their concentrated
form.
DO NOT use aerosols, solvents or abrasives.
DO NOT use paper towels or rough cloths to
clean windows.