User Manual
Table Of Contents
- Gryphon™ I GBT4102
- Table of Contents
- Setting Up the Reader
- Configuring the Base Station
- Connecting the Base Station
- Charging the Batteries
- Linking the Reader
- Selecting the Interface Type
- Programming
- Stand Detection
- Technical Specifications
- LED and Beeper Indications
- Error Codes
- Base Station Indications
- Cleaning Procedure
- Datalogic Limited Factory Warranty
- Support Through the Website
- Ergonomic Recommendations
- Keypad
Error Codes
Quick Reference Guide 37
Error Codes
Upon startup, if the reader sounds a long tone, this means
the reader has not passed its automatic Selftest and has
entered FRU (Field Replaceable Unit) isolation mode. If the
reader is reset, the sequence will be repeated. The follow-
ing table describes the LED flashes/beep codes associ-
ated with an error found.
NUMBER
OF LED
FLASHES/
BEEPS
ERROR
CORRECTIVE
ACTION
1Configuration
Contact Helpdesk for
assistance
2Interface PCB
4 Reader Module
5
Laser Pointer (if so
equipped)
6Digital PCB
14 CPLD/Code Mismatch