User Manual
Table Of Contents
- Gryphon™ I GBT4102
- Table of Contents
- Setting Up the Reader
- Configuring the Base Station
- Connecting the Base Station
- Charging the Batteries
- Linking the Reader
- Selecting the Interface Type
- Programming
- Stand Detection
- Technical Specifications
- LED and Beeper Indications
- Error Codes
- Base Station Indications
- Cleaning Procedure
- Datalogic Limited Factory Warranty
- Support Through the Website
- Ergonomic Recommendations
- Keypad
Linking the Reader
Quick Reference Guide 15
Linking to Bluetooth Adapter in HID
1. Install any drivers provided with the Bluetooth
adapter.
2. Scan the
Link to a PC in HID
bar code below to make
the scanner visible to the host computer.
3. Use the host computer's Bluetooth manager to
"Discover new devices" and select "Datalogic Scan-
ner." If you receive an error message, it may be nec-
essary to disable security on the device.
4. Select "connect" on the PC to link the reader to the
PC. Use a text editor to see incoming data from the
reader.
Link to a PC in HID
Use Variable PIN Code
When you hear the beep and see the Green LED blinking
indicating the reader is waiting for an alphanumeric entry,
enter the variable PIN Code by scanning the bar code(s)
corresponding with the required PIN Code from
Keypad, starting on page 1-46.
Some Bluetooth drivers on the Host (such as
WIDCOMM and BlueSoleil) require a Variable
PIN Code. When attempting connection in HID
Profile, the application presents a window
that includes a PIN Code which is to be input
using the GBT4102. Please read the barcode
"Use Variable PIN Code" and restart the
sequence from step 2 above.