User Manual

Linking the Reader
14 Gryphon™ I GBT4102
Linking the Reader
Link Datalogic RF Devices to Base
For RF devices, before configuring the interface it is nec-
essary to link the handheld with the base.
To link the handheld and the base, press the trigger to
wake it and place it on the base. If the reader was previ-
ously linked to another base, you must first scan the
Unlink barcode before re-linking to the new base.
Link Scanner to Bluetooth Adapter in Server
Mode
1. Install any drivers provided with the Bluetooth
adapter.
2. Scan the
Enable RF Link to Server label below to
make the scanner visible to the host computer.
3. Use the host computer’s Bluetooth manager to
“Discover new devices” and select "Datalogic Scan-
ner." If you receive an error message, it may be nec-
essary to disable security on the device.
4. Use an RS-232 terminal program to see incoming
data on the port designated by the computer's
Bluetooth manager.
The Gryphon I GBT4102 can be set up to
require a PIN code when connecting. If you
want to set up a PIN, or when adding new
equipment to a system that uses a custom
security PIN, please see the PRG for informa-
tion.
Unlink
Enable RF Link to Server