User Manual
Table Of Contents
- Gryphon™ I GBT4102
- Table of Contents
- Setting Up the Reader
- Configuring the Base Station
- Connecting the Base Station
- Charging the Batteries
- Linking the Reader
- Selecting the Interface Type
- Programming
- Stand Detection
- Technical Specifications
- LED and Beeper Indications
- Error Codes
- Base Station Indications
- Cleaning Procedure
- Datalogic Limited Factory Warranty
- Support Through the Website
- Ergonomic Recommendations
- Keypad
Charging the Batteries
Quick Reference Guide 13
4. Remove the old battery from its place (if present),
and insert the new battery in the same position.
5. Replace the battery holder, plug in the connector
and return the contacts circuit to its previous loca-
tion.
6. Insert the cover in the handle and screw it back
into place.
When inserting the new battery into the han-
dle, take care to position the battery and the
connector as shown.
Pass-through
hole
Gold
contacts
circuit