User Manual
Table Of Contents
- Gryphon™ I GBT4102
- Table of Contents
- Setting Up the Reader
- Configuring the Base Station
- Connecting the Base Station
- Charging the Batteries
- Linking the Reader
- Selecting the Interface Type
- Programming
- Stand Detection
- Technical Specifications
- LED and Beeper Indications
- Error Codes
- Base Station Indications
- Cleaning Procedure
- Datalogic Limited Factory Warranty
- Support Through the Website
- Ergonomic Recommendations
- Keypad

Charging the Batteries
Quick Reference Guide 11
The useful life of LI batteries depends on usage and num-
ber of charges, etc., after which they should be removed
from service, especially in mission critical applications. Do
not continue to use a battery showing excessive loss of
capacity, it should be properly recycled / disposed of and
replaced.
Collect and recycle waste batteries separately from the
device in comply with European Directive 2006/66/EC,
2011/65/EU, 2002/96/EC, 2012/19/EU, and subsequent
modifications, US and China regulatory and others laws
and regulations about the environment.
CAUTION
Only in case of long storage, to avoid deep
discharge of the battery it is recommended to
partially recharge the battery every three
months to keep the charge status at a
medium level.
As a reference, run a fast recharge for 20 min-
utes every three months on unused products
to avoid any performance deterioration of the
cell.










