User Manual

Connecting the Base Station
6Gryphon™ I GBT4102
Host Connection — Verify before connection that the
reader’s cable type is compatible with your host equip-
ment.
Most connections plug directly into the host device as
shown in Figure 4. Keyboard Wedge interface cables have
a ‘Y’ connection where its female end mates with the male
end of the cable from the keyboard, and the remaining end
at the keyboard port on the terminal/PC.
Figure 4. Connecting to the Host
Power Connection — Plug the AC Adapter into an approved
AC wall socket with the cable facing downwards (as
shown in Figure 1) to prevent undue strain on the socket.
Disconnecting the Cable — To detach the cable, insert a
paper clip or similar object into the hole on the base, as
shown in Figure 5.
Figure 5. Disconnecting the Cable
The Gryphon I GBT4102 can be set up to require
a PIN code when connecting to the host. If you
are adding new equipment to a system that
uses a custom security PIN, please see the PRG
for information before proceeding.
U
S
B
I
B
M
K
e
y
b
o
a
r
d
W
e
d
g
e
W
a
n
d
or...
or...
or...
Insert
Paper Clip