User Manual
Table Of Contents
- Gryphon™ I GBT4102
- Table of Contents
- Setting Up the Reader
- Configuring the Base Station
- Connecting the Base Station
- Charging the Batteries
- Linking the Reader
- Selecting the Interface Type
- Programming
- Stand Detection
- Technical Specifications
- LED and Beeper Indications
- Error Codes
- Base Station Indications
- Cleaning Procedure
- Datalogic Limited Factory Warranty
- Support Through the Website
- Ergonomic Recommendations
- Keypad
Configuring the Base Station
2Gryphon™ I GBT4102
1. Insert the appropriate parts for the desired base
station position, as shown below.
2. Using your thumbs, push open the plastic tabs on
the bottom of the base to free the wing holders.
A tool such as a rigid pen or a flat screwdriver
can be used to change the mounts. Do not
allow it to touch the contacts.
To ensure best contact and performance, do
not intermix the parts of the two different
mount sets.
Standing,
Horizontal
Horizontal
or Vertical
Only
Tab
Tab