User`s manual

FORMULA COLOR™

3.7 EXIT FROM THE SETUP PROCEDURE

To end the SETUP procedure, you will have to:

1 - Select the Exit menu by pressing [ESC]

2 - Select one of the items by pressing the correct key (an erroneous one re-enters

the setup procedure):

KEY DESCRIPTION ITEM

Press [S] to activate

the function.

Saves the new values in the CMOS

memory and EEPROM memory and

exits.

CMOS+EEPROM

Save & Exit

Press [C] to activate

the function.

Saves the new values in the CMOS

memory and exits.

CMOS Save & Exit

Press [Q] to activate

the function.

Discards the new values and exits. Discard

Press [D] to activate

the function.

Load the default factory values.

Factory parameters

- If you exit with saving, a message appears notifying that the program is about to

quit, and you can choose to reboot the Formula Color™ terminal to see the

effects of the new configuration. Remember that the Formula Color™ terminal

parameters are used by BIOS at boot-time.

- If you exit with the “Discard” command, no change will affect CMOS and

EEPROM memories.

- If you choose the “factory parameters”, the application applies it and then re-

enters the setup procedure.