User`s manual

FORMULA COLOR™
8
3 2
2.2 CONNECTION TO THE HOST COMPUTER
CAUTION
Before continuing with this phase be sure both the computer and
the F-Color cradle are turned off.
2.2.1 RS232 Connection via Cradle
To connect the F-Color single cradle to the host computer proceed as follows:
1 - Connect the cable to the serial port of the host computer;
2 - Connect the other end of the same cable (RJ connector) to the RS232 port of
the cradle;
3 - Insert the power-supply plug into the connector on the base of the cradle;
4 - Attach the power supply to a power outlet;
5 - Turn on the computer;
6 - Put the Formula Color™ terminal into its cradle.
B
A
C
Figure 6 – RS232 Cradle Connection
Key:
A) Host Computer
B) F-Color Single Cradle
C) Power Supply