User`s manual

FORMULA COLOR™
3 2
2.1.2 F-Color Vehicle Cradle
The F-Color vehicle cradle comes with its accessories already assembled. To install
it inside a vehicle driving compartment, proceed as follows:
1) mount the metal bracket;
2) connect a regulated power supply between the vehicle’s battery and the
F-Color single cradle.
CAUTION
Do not connect the cradle directly to the vehicle's battery.
Possible voltage surges can damage the cradle or cause it to
malfunction.
Power Cable Specifications:
The power supply cable must have the following characteristics:
Min Current Capacity 1A
Polarity: positive external
negative internal
Mechanical dimensions: external diameter: 5.5 mm
internal diameter: 2.1 mm
Male Plug
Metal plug length: 14 mm
Insert the Formula Color™ terminal only after mounting the cradle in the vehicle.
Terminal Battery Status LED
When the terminal is inserted into the cradle, the terminal LED signals the status of
the its batteries:
COLOR STATUS
Green blinking Battery slow charging or waiting precharge timeout
Constant red Battery fast charging
Constant green Battery charged
Orange blinking Battery failure
Off Alkaline battery
6