User manual

USE OF EASYGEN™

To develop a new program with EasyGen we suggest that you proceed with the

following steps:

1. perform an analysis of the application and build a flow chart using the available

functions;

2. open a new program [File menu - New] see par. 4.2.1;

3. choose the type of Formula terminal to be used;

4. define the tables and fields [Tools menu - Editor Tables] see par. 4.6.1;

5. define names for variables [Tools menu - Editor Variables] see par. 4.6.2;

6. proceed with the insertion of all the functions that must be executed by the

terminal as defined by your flow chart [Insert menu] see par. 4.4;

7. save the program [File menu - Save] see par. 4.2.3;

8. set the Formula terminal with the serial parameters that must be used by your

application [Tools menu - Options] see par. 4.6.3;

9. send the interpreter program EIXXX_YYY.HEX to the Formula terminal (this

“Initialization” operation is only performed the first time that a program must be

loaded) [Utility menu - Initiate] see par. 4.7;

10. load the actual application program on the Formula terminal [File menu - Send]

see par. 4.2.7.