User manual

INSTALLATION
2
5
To connect the Formula cradle to the host computer, proceed as indicated below:
1. connect the serial port of the host computer to cable 94A054000 for 9-pin
connections or to cable 94A054010 for 25-pin connections;
2. connect the other end of the same cable (RJ connector) to the RS-232 port of
the cradle;
3. insert the power-supply plug into the jack on the base of the cradle;
4. attach the power supply to a power outlet;
5. turn on the cradle and the computer;
6. put the Formula terminal into the cradle.
PowerSupply
94A054000
(94A054010)