User manual

SYSTOOLS™2001
2
4
Carry out the physical connections as described below:
1- connect the serial port of the host computer to cable 94A054000 for 9-pin
connections or to cable 94A054010 for 25-pin connections;
2- connect the other end of the same cable (RJ connector) to the RS-232 port of
the cradle;
3- insert the power-supply plug into the outlet on the base of the cradle;
4- attach the power supply to a power outlet;
5- turn on the cradle and the host computer;
6- put the Formula terminal into its cradle and, if necessary, wait for the recharging
of the battery.
RS485
RS485
RS232
Power Suppl
y
Key:
A) Host computer
B) Single cradle
C) Power supply
A
B
C
94A054000
(94A054010)